Filter
Top Products
42 - English
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock has been set (Setup - System
Setting) before you proceed with a timer recording.
Press the MENU button.
Press the 34 button to select
“Program” and then press the OK or 1
button.
Press the 34 button to select
“Standard Timer” and then press
the OK or 1 button.
Press the 34 button to select
“Scheduled Record List”, and then
press the OK or 1 button.
4
3
2
1
Before you start
Set timer recording option.
• The Timer Recording screen is displayed.
Fill the input items using the arrow buttons and
number buttons.
2 1:Moves to the previous/next item,
34: Sets a value.
• Source:The video input source (AV1, AV2,
AV3 AV4 or DV), or the broadcasting
channel you want to make a timer
recording from.
• Date: Set the recording day.
• Start/End Time: Start and end time of the timer
recording.
• Type (Recording cycle).
Once: Records once.
Weekly: Records at a set time every week.
Daily: Records at a set time every day.
• V/P: VPS (Video Program System) or PDC
(Program Delivery Control) function.
- If you set this function on, you can control the
starting and ending time of recording by special
signal included in the broadcasting signal.
If a TV program is shortened or starts earlier or
later than scheduled, this function synchronizes
the starting and ending time of recording with
the actual broadcasting time automatically.
- Set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer
recording will not take place.
- Do not select PDC or VPS unless you are sure
the program you wish to record is broadcast
with PDC or VPS.
Mode (Recording Mode)
- FR: Select when you want to set video quality
automatically. It depends on the remaining time on
the DVD.
- XP (high quality): Select when audio and video qualities
are important. (Approx. 1 hour)
- SP (standard quality): Select to record in standard
quality. (Approx. 2 hours)
- LP (low quality): Select when a long recording time is
required. (Approx. 4 hours)
- EP (extended mode): Select when a longer recording
time is required. (Approx.6 hours)
5
Making a Standard
Timer
RETURNOKMOVE EXIT
Program
DVD-RAM(VR)
SHOWVIEW
Standard
Timer
S
HOWVIEW
Extended
:
Scheduled Recor
d List
DVD-RAM(VR)
01 CH 09 11/22 09:22AM 10:30AM Once SP
CH 05 12/10 12:30AM 09:00PM Weekly LP
---
--
/
-
-
--:---- --:---- -
- --
No. Source Date Start End Type Mode V/P Edit
Remaining Recording Time 02:12 SP
No. 01
Source PR 01 Date 01/ 01
Start 12 : 00 End 14 : 00
Type Once Mode SP
V/P On
RETURNOKMOVE
EXIT
RETURNOKMOVE EXIT
Scheduled Record List
DVD-RAM(VR)
01
---- -
---- --:-- --:-- -- -- --
No. Source Date Start End Type Mode V/P Edit
Remaining Recording Time 02:12 SP
Scheduled Record List
DVD-RAM(VR)
01 CH 09 11/22 09:22AM 10:30AM Once SP
CH 05 12/10 12:30AM 09:00PM Weekl
yLP
---
--
/
--
--:---- --:---- -- -
-
No. Source Date Start End Type Mode V/P Edit
Remaining Recording Time 02:12 SP
No. 01
Source PR 01 Date
01/ 01
Start 12 :
00 End 14 : 00
Type Once Mode SP
V/P Off
RETURNOKMOVE EXIT