Filter
Top Products
English - 39
English
Check that the disc has enough available space for the
recording. Adjust the recording mode.
Press the OPEN/CLOSE button, and
place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOADING” disappears from the front
panel display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 36)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 36)
Press the INPUT button to select the
input source according to the
connection you made.
The front panel display changes in the following
sequence:
A. PROG Number # AV1 #AV2 # AV3 #AV4 # DV B
a=======================b
If you connect a digital camcorder, press
the INPUT button to select DV.
Press the REC MODE button repeatedly,
(or Press the REC MODE button and
then press the 34 buttons) to select
the recording speed (quality).
A. SP > LP > EP > XP B
a===========b
4
3
2
1
Before you start
Recording from external
equipment you are watching
Record Mode
SP
Press the REC button.
To pause recording
Press the REC PAUSE button to pause a recording in
progress.
• Press the REC PAUSE button again to resume
recording.
•You can switch channels by pressing the PROG
(/) buttons while recording pauses.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
■ You cannot change the recording mode and input
source while recording.
■ Recording will stop automatically if there is no
free space left for recording.
■ Up to 99 titles can be recorded onto a disc.
■ Recording will stop automatically if a copy pro-
tected image is selected.
■ DVD-RAM/DVD-RW discs must be formatted
before starting to record.
Most new discs are sold unformatted.
■ Do not use DVD-R authoring discs with this unit.
NOTE
5