Hitachi DV-RX7000E DVD Recorder User Manual


 
90 - English
Troubleshooting
If your product malfunctions, go through the checkpoints below before contacting a Hitachi authorized service center.
The DVD recorder requires some time to initialize
and the input will be displayed for approx.10 seconds
after it is turned on.
Check whether the power cord is securely plugged
into the power outlet.
Did you set the DVD recorder channel settings
correctly?
Check the free space on your DVD-RAM/DVD-
RW/DVD-R discs.
Recording is possible for DVDRAM/DVD-RW/DVD-R
discs only. If a program is copy protected, it cannot
be recorded.
Each press of the Stop button during recording
creates a title. When the REC PAUSE button is
pressed, the paused state is kept. When the REC
Pause button is pressed again during REC pause,
the title under pause will be kept recording.
Check whether the disc is inserted correctly with
the label facing up.
Check the regional code of the DVD disc.
•This DVD recorder cannot play some types of discs.
(See page 5, 49)
You cannot use this operation or function due to one
of the following reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support this feature (for
example: angles)
(3) The feature is not available at the moment.
(4) You’ve requested a title, chapter, or scan time
that is out of range.
The disc does not support all selected functions. In
this case, some settings configured in the settings
menu may not work properly.
The aspect ratio is fixed for DVD discs. (See page 33)
The angle operation is available only when the disc
contains images captured from different angles.
Audio and subtitle languages are disc-specific. Only
the sound and subtitle languages contained on the
DVD disc are available and displayed in the disc
menu.
Power
Recording
Playback
The input is displayed for a while
when the power is turned on.
Cannot record TV programs.
I pressed the REC button but there
is no response.
Differences between Using REC
PAUSE Button and Using Stop
Button during Recording
Cannot play the disc.
icon appears on the screen.
Play mode settings are different
from the settings configured in the
Settings menu.
Cannot change the aspect ratio.
The angle operation does not work
while playing a DVD disc.
The selected audio and/or subtitle
language is not played.