Filter
Top Products
HRDP DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev D 21
02/11
Quick Start Instructions
1. Turn on the DVR. See the Turning on the DVR section for more details.
2. Log in -- Use the number buttons to enter the password when prompted
– The default password is <none> – Press ENTER.
3. Complete System Configuration to set up the date, time and system ID.
See the System Configuration section for more details.
4. Complete Disk Configuration to set overwrite options and enable SMART
Check. See the Disk Configuration section for more details.
5. Complete User Configuration to change the Admin password and add
additional users. See the System >User Configuration section for more
details.
6. Complete Camera Configuration for all attached cameras. See the
Camera Configuration section for more detail.
7. Complete PTZ Configuration for any attached Pan / Tilt / Zoom cameras.
See the PTZ Configuration section for more details.
8. Create a recording schedule. See the Record section for more details.
9. Complete Sensor Configuration to enable any external devices
connected to sensor inputs or relay outputs. See the Record >
Motion/Event Configuration section for more details.
10. Complete Motion/Event Configuration to trigger recording on an event:
motion, sensor, video loss. See the Motion/Event Configuration section
for more details.
11. The DVR is now configured to record, search and playback video. See
the Operation section in this manual for more information on using the
DVR.
Logging In for the First Time
The default administrative log in information:
ID: admin
Password: <none>