Honeywell HREP16 DVR User Manual


 
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B 69
08/10
Figure 2-64 EVENT Window
5. Select the type of event recording (NONE, CONTINUOUS, MOTION,
CONTINUOUS/MOTION), then click OK. The EVENT window closes.
Color Codes for the Schedule Screen
The schedule screen uses four differently colored blocks to indicate the different recording
modes.
Configuring Alarm Setup
Click ALARM RECORDING on the left side of the RECORDING setup window.
The ALARM RECORDING Setup window opens.
Configure ALARM RECORDING in the same way you configure CONTINUOUS/MOTION
RECORDING. See Configuring Continuous/Motion Recording on page 65 for more
information.
SIZE/FPS/QUALITY and SCHEDULE Configuration Fields
Table 2-5 Color Codes for the Recording Modes
Block Color Recording Mode
PINK No scheduled or motion recording.
SKY BLUE Continuous recording.
BLUE Recording triggered by motion detection.
YELLOW Continuous recording and recording triggered by motion
detection.
SIZE/FPS/QUALITY Recording settings for each channel can be defined across
a 24-hour period, in blocks (for example between 09:00
and 18:00), or for each individual hour.
Note When SCHEDULE MODE is set to WEEKLY, each
day of the week can also be selected.
SCHEDULE Use this tab to configure at what times the DVR records
and whether it records continuously or as a result of
motion detection.