Honeywell HXCT16X Home Theater Server User Manual


 
Chapter 2
Installation
Required Tools
Although no special tools are required to install the multiplexer, it is only
one part of a complex system. Refer to the Installation manuals for the
other components in your particular installation for special tool
requirements.
5
< Figure 2 > connections.multiplexer
Connecting Cameras
You can connect up to 16 cameras to the . Connect the
camera BNCs to the IN BNC connectors (top row). The loop-through
connectors (OUT) are auto-terminated, so terminating resisters are not
needed if you do not loop video out to another device.
multiplexer
NOTE : Connecting a cable to the loop-through connector switches off
the termination. Do NOT connect a cable to the loop-through BNC
connectors unless it is connected to the input of another video device.
ENGLISH