Filter
Top Products
Manual Alarm Action Setup (1)
< Figure 21 > Manual Alarm Action Setup (1) screen.
This screen allows you to set up the actions the multiplexer will take
when there is a Manual alarm condition.
When set to On, the multiplexer’s internal buzzer will sound
during a Manual alarm condition.
When set to On, the screen display will change to the
one defined in the Alarm Screen Format menu during a Manual alarm
condition.
When set to On, the multiplexer sends the alarm
information to an external relay box via the network during a Manual
alarm condition.
When set to On, an “A” displays on the screen when
a Manual alarm condition occurs. It remains on the screen until it is
cleared.
• Buzzer :
• Alarm Screen :
• Network Relay :
• Message Latch :
27
ENGLISH