Filter
Top Products
Press and to start Stack Sequence which sequences
through multi-format screens.
In addition to its other functions, the button can be used to
assign cameras to the Spot monitors.
Press then 1, 2, 3 or 4 to select the Spot monitor;
then press camera button of the camera you want displayed on that
Spot monitor. You can assign any one of the 16 cameras to any of the
four Spot monitors.
This button freezes the video.
Press to freeze the video from the currently
selected camera. Press then to freeze the video from all the
cameras.
This button enters the Zoom Mode.
Press to enter the Zoom Mode.
This button has several functions; it brings up a Popup Menu,
sets selections on the OSD menus and decreases numbers in the
number setup function.
Press to enter the Popup Menu or to set a
selected item from on of the menus.
This button has several functions; it acts as a “Cancel” button,
clears Cameo selections and increases numbers in the number setup
function.
Press to cancel entries, clear the Cameo or to
decrease the number.
The Up, Down, Left and Right buttons are used whenever
you need to move the cursor, highlight bar or Cameo window.
Press the arrow corresponding to the direction you
want to move.
to These buttons are used to make camera selections or enter
numbers as needed.
ESC
2nd 2nd
• OPERATION : 2nd
• OPERATION :
ESC
• OPERATION :
SET
• OPERATION : SET
ESC
• OPERATION : ESC
• OPERATION :
116
55
ENGLISH