Filter
Top Products
Time, Date Setup
11
In addition to setting the multiplexer’s time and date, these screens can
be used to set the format and select daylight saving time. You can use
the arrow buttons on the multiplexer or mouse to select the menu item.
Press SET or the left mouse button to decrease the number. Press ESC
or the right mouse button to increase the number.
There are three date formats to choose from. The
month and days are each two-digit numbers represented by MM and
DD. Years are four-digit numbers represented by YYYY. The U.S.
format is: MM-DD-YYYY. Europe’s format is: DD-MM-YYYY. Asia’s
format is: YYYY-MM-DD.
There are two hour formats to choose from. One is 24-
hour (military) time. The second is AM/PM.
There are two choices for the clock source. If your
multiplexer is connected to a network, set the option to Network Clock
and the unit will receive the clock information from the master
multiplexer. If your multiplexer is not connected to a network, set the
option to Internal Clock.
Use the arrow or mouse buttons to change the year.
Use the arrow or mouse buttons to change the month.
Use the arrow or mouse buttons to change the date.
Use the arrow or mouse buttons to change the hour.
Use the arrow or mouse buttons to change the minute.
Use the arrow or mouse buttons to change the second.
• Date format :
• Hour format :
• Clock Source :
• Year :
• Month :
• Date :
• Hour :
• Minute :
• Second :
• Next > : Selecting this takes you to the second Daylight Saving
setup Screen.
ENGLISH