Filter
Top Products
< Figure 33 > VCR System Setup screen.
VCR System Setup
The VCR System Setup screen is used to synchronize the
with your VCR.
There are two options for multiplexer input from the
VCR: BNC and S-Video.
Set to Off if you are not using the VCR’s
synchronizing trigger pulse. When using your VCR’s synchronizing
trigger pulse, set to match the VCR’s signal; + for positive edge
sensing and – for negative edge sensing.
When On, the buzzer will beep every 20
seconds.
Selecting this brings up a list of VCRs. Select your VCR
from the list. If your VCR is not on the list select User Define.
NOTE : If your VCR has a synchronizing trigger pulse, using it will save
you a lot of time when setting up your system.
• VCR Input :
• External Trigger :
• Panic Rec Buzzer :
• VCR Type :
multiplexer
41
ENGLISH