Humax LAU-26TPVR Flat Panel Television User Manual


 
Mounting Device
15. Mounting Device
This describes how to set up the LCD-TV. Select the most appropriate procedure
depending on your requirements.
If you encounter any problem when setting up the LCD-TV, please contact
your local LCD-TV distributor.
Assembling the Stand-Base
1. Attach your LCD-TV with the stand-base.
2. Firmly fix the stand-base and the LCD-TV using the 4 screws.
Note : Firmly fix the stand-base for the LCD-TV before moving it,
as the stand-base may fall and could cause serious injury.
Installing on the Wall
You can install the LCD-TV on the wall using a mounting bracket (sold separately).
To reduce the risk of damage from falling, this LCD-TV should be secured at all times.
(The LCD TV in the picture may not look exactly like yours.)
1. Before you install, separate the LCD-TV and stand-base.
2. Attach your main body bracket on the LCD-TV and fix using screws firmly.
3. Stick the LCD-TV with main body bracket into the wall bracket attached on the wall.
4. Tighten up a safety-screw.
Note :
_ Do not install the set on a weak surface such as plaster or foam board.
_ Be at enough distance to open CI door between the LCD-TV and the wall
when installing on the wall. If the LCD-TV is not at proper distance from the
wall, the CI door may be not opened enough.
123
1
2