Filter
Top Products
1/36
DIGITAL SIGNAGE
1. Please ensure that the power to the device is switched off, then connect each cable one
after another before restoring power.
2. Connect D-SUB to D-Sub cable. Then tighten the scr
ew of the cable after connecting PC
D-SUB.
3. Connect the power cord to the product.
4. T
urn on the power of the product and PC . The screen will appear within 10 seconds.
5. Select "PC" input by pressing "SOURCE" on OSD button or remote control.
– HDMI input gives better video quality than analog RGB input.
– Both HDMI and analog RGB support plug and play.
How to Connecting analog
RGB (PC D-SUB)
DID_eng.indb 14 2009-09-15 오후 8:24:25