Filter
Top Products
5. COMMAND TYPE
Command Description
pn / pf
Power on / Power off
fn / ff
Fan on / Fan off
fr
Factory reset
sd / sp / sc / sa
Source change ( d:HDMI, p:PC, c:Component, a:AV )
sbu / sbd
Sub-Brightness 1 step up / down
rou / rod
Red Offset 1 step up / down
gou / god
Green Offset 1 step up / down
bou / bod
Blue Offset 1 step up / down
scu / scd
Sub-Contrast 1 step up / down
rgu / rgd
Red Gain 1 step up / down
ggu / ggd
Green Gain 1 step up / down
bgu / bgd
Blue Gain 1 step up / down
blu / bld
BACKLIGHT Value 1 step up / down
chxvy
H Set Count is x, V Set Count is y
nhxvy
H Set window is x, V Set window is y
ehxvy
H Edge ADJ is x, V Edge ADJ is y
x ( gure )
Display sequence no is x
cr
Enable Color Control Mode; Under Cr mode, user can set color value without Header command
ex) ro120 : Red Offset 120, bg100 : Blue Gain 100
ir
Enable Ir Mode, In IR Mode, user can use keyboard buttonsas remote controller
ps
Current power status check. If current power is on(off),
Hyper Terminal windows display “Power On(Power Off)” message.
is
Current input source status check.
If current input source is VGA, Hyper Terminal windows display “VGA Mode” message.
DID_eng.indb 39 2009-09-15 오후 8:25:48