Filter
Top Products
31/36
English
DIGITAL SIGNAGE
installation item Product 1 Product 2 Product 3 Product 4 Product 5 Product 6
H Set Count
3 3 3 3 3 3
V Set Count
2 2 2 2 2 2
Display Sequence
1 2 3 4 5 6
H Edge ADJ /
V Edge ADJ
These are the set up value to make up the un-displayed area of Bezel Part.
It can be adjustable according to the contents
SET ID
It is necessary to control via RS232 communication port on PC. But do not
need to set up or change when they are not controlled by PC
Master
You are recommended to use the Master on state only one of products that
you are using
Set up Value
[Cautions]
- In case of connecting the products in series from the input device (HDMI, analog RGB,
component, video etc.), up to about 25 units are possible. But, the number of connecting
devices can be different from the input signal level of each device and thereby amplified
distributor can be needed for this product.
(when over 25 units are connected, the screen may not be displayed properly)
-
Y
ou are recommended to use the component and progressive frequency of digital RGB in
case of using multi-vision function.
(It may not be displayed properly when using Video input and interlace frequency)
DID_eng.indb 31 2009-09-15 오후 8:24:29