Filter
Top Products
9
Insignia NS-7UTCTV 7" Under-the-Cabinet DVD/LCD TV
www.insignia-products.com
Using your TV
After the connections have been made and your
DVD/TV has been mounted and plugged in, you
are ready to use your TV.
Turning the power on and off
To turn the power on and off:
1 Press the POWER button on the front panel
of your DVD/TV or on the remote control. The
POWER indicator turns green.
2 To turn off your DVD/TV, press the POWER
button again. The screen image disappears
and the POWER indicator turns red.
Changing the volume
You can change the volume using your DVD/
TV’s front panel or the remote control.
To change the volume:
1 Press VOL+ or VOL- on the remote control,
or VOL + or VOL - on the TV to raise
or lower the volume.
2 Press MUTE on the remote control to mute
the sound, and press it again (or the VOL+ or
VOL- ) to restore the sound.
Changing the mode
Your DVD/TV supports multiple modes of
operation.
To select the operating mode:
• Press the SOURCE button on your DVD/TV
to select from the following modes:
•DVD
•TV
•AV
•FM
•AM
•ATSC
The name of the input source appears on the
display panel when it is selected.
Or, press one of the following on the remote
control to select the mode of your choice:
• DVD button
• TV button
• AV button
• FM/AM button
• DTV button
Changing channels
To change channels:
• Press CH+ or CH- on the remote control or
press CH + or CH - on your DVD/TV.
Or, to enter a channel number directly, press
the number buttons on the remote control.
To switch between two channels:
1 Press LAST to change from the currently
tuned channel to the previous channel.
2 Press LAST again to change back to the
originally tuned channel.
Making initial TV mode settings
To access and use the TV SETUP menu:
1 Press SETUP. The TV SETUP menu opens.
2 Press or to select the item you want to
set.
3 Press or to go to the item selected.
4 When a confirmation is required, press OK to
confirm your choice.
To automatically program channels into
memory:
1 Press SETUP. The TV SETUP menu opens.
2 Press or to select AUTO MEMORY,
then press OK or to begin memorizing the
available channels.
3 To stop the auto search, press .
Setting the time
To set the time:
1 Press TIME on the remote control, or TIME/
ENT on your DVD/TV, twice.
2 Press or to select the hour or minute
position, then press or to change the
setting.
Setting the timer
The timer lets you set specific times for the TV to
turn on and off. It also lets you set the signal
source and the channel to watch.
Note
A small amount of electric power is consumed
even when the power is turned off.