Insignia ns-7utctv TV DVD Combo User Manual


 
14
Insignia NS-7UTCTV 7" Under-the-Cabinet DVD/LCD TV
www.insignia-products.com
Or, press PICTURE/SET again to memorize
the default preset number in sequence.
5 To access memorized (preset) stations, enter
the preset number with the number buttons.
After a pause, the radio will go the the
selected station.
Or, press or to go to the next or
previous preset stations.
Using the advanced DVD
setup menus
Using the on-screen DVD setup menus
Your TV has an on-screen menu that lets you
change advanced settings in DVD mode.
To access and use the on-screen menus:
1 In DVD mode, press SETUP. The SETUP
menu opens.
2 Press , , , or to select an option,
then press OK to select the option. All items
in the category appear on the menu.
3 Press to select another category, then
press OK to confirm.
4 Press to go to a different setup menu.
5 To exit the on-screen menu, select EXIT.
On-screen DVD setup menus
Changing the LCD screen settings
To change LCD screen settings:
1 In DVD mode, press PICTURE/SET. The
PICTURE menu opens.
2 Press or to select BRIGHTNESS,
CONTRAST, or COLOR, then press or
to adjust the setting between 0 and 20.
3 Press or to select Language, then
press or to choose the language you
want.
4 If you want to reset all settings to the factory
default, press or to select Reset, then
press OK. The settings are returned to
factory default.
5 To exit the on-screen menu, press or
to select PICTURE, then press .
Note
If you do not press any buttons for three seconds,
the station will not be memorized.
Note
To go immediately to the selected preset station,
press ENT.
Note
When switching between memorized stations, “CH
XX” appears briefly on the display panel (where
XX is the preset number). After a few seconds the
preset number is replaced by the radio frequency.
On-screen
menu
Options
General Setup TV Display–Lets you select the aspect ratio of
the picture. Choices include Normal/PS,
Normal/LB (use these settings when the DVD
will be shown on a normal 4:3 TV), or Wide
(use this setting when the DVD will be shown
on your DVD/TV, or on a wide screen TV).
OSD Lang–Lets you select the language for the
on-screen display. Choices include English,
French, and Spanish.
Screen Saver–Lets you activate Screen Saver
mode, which shows a screen saver on the TV
screen if the same image remains on the
screen for several minutes.
Speaker Setup Downmix–Lets you select the audio output of
your DVD/TV. Choices include LT/RT (mixed
mono output), or Stereo (stereo output).
Dolby Digital
Setup
Dual Mono–Lets you select the Dolby Digital
audio output of your DVD/TV. Choices include
Stereo, L-Mono, R-Mono, and Mix-Mono.
Dynamic–Lets you adjust the linear dynamic
compression rate to get different signal effects.
Video Setup Sharpness–Lets you adjust the sharpness level
of the picture.
Brightness–Lets you adjust the brightness
level of the picture.
Contrast–Lets you adjust the contrast level of
the picture.
Preference Page
(your DVD/TV
must be in Stop
mode to access)
Audio Subtitle and Disc Menu–Lets you select
the subtitle and disc menu language, or to put
the subtitles and disc menus on audio. Choices
include English, French, Spanish, and other
languages, depending on what is available on
the DVD.
Parental–Lets you lock out portions of a DVD,
or the entire DVD, depending on the contents
of the disc. When you select this item, you will
be prompted for a password (see Password,
below). Use the number buttons to enter the
password. For a list of the ratings, see “MPAA
Ratings” on page 11.
Password–Lets you set the password for
access to the Parental setup menu. The initial
password is 1369. Enter the new password
with the number buttons, then press OK to
confirm. When you are prompted to reenter the
password, enter the same password, then
press OK to confirm.
Default Reset–Lets you reset all preference
settings to factory default.
On-screen
menu
Options