Insignia NS-L42Q120-10A Flat Panel Television User Manual


 
4
NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV
www.insigniaproducts.com
42"/46" LCD TV
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-L42Q120-10A or
NS-L46Q120-10A represents the state of the art in
LCD TV design and is designed for reliable and
trouble-free performance.
Installing the stand
To install the stand:
1 Place a cushion or cloth on a flat surface, such as
a table, then place the TV face down on the
cushion or cloth.
2 Insert the stand into the TV base, then secure
the stand to the base with the four provided
M4 × L10 mm screws.
Installing a wall-mount
bracket
To install a wall-mount bracket:
1 Place a cushion or cloth on a flat surface, such as
a table, then place the TV face down on the
cushion or cloth with the stand extended over
the edge of the table.
2 Remove the four screws that secure the stand to
the base, then remove the base.
3 Attach the included TV base cover to the TV
base to prevent debris from entering your TV
after it is mounted on the wall.
4 Attach the wall-mount bracket with the four
screws that come with the wall-mount bracket
kit.
Note
To remove the base, reverse Step 2.
Warning
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of hazards,
do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
Cover