Filter
Top Products
Filename [MX1SEU_07HDD Operation.fm]
Masterpage:Left+
40 EN
BASIC OPERATIONS ON HDD DECK
Page 40 Monday, 6 December 2004 14:01
One Touch Replay
You can move back the playback position slightly.
Press w.
● Each press skips back for approximately 7 seconds and resumes
playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
1.5x Speed Search
You can play back a title quickly during playback or Live Memory
Playback (A pg. 46).
1.5x speed search cannot be performed during recording on HDD
or DVD.
1 Press O to locate the point to start 1.5x speed search from.
2 Press I to resume playback.
3 Press N once.
● Pressing ON SCREEN displays A+X1.5B on the top right corner of
the screen.
NOTE:
When the unit is connected with a digital audio device using an
optional optical cable, set ADIGITAL AUDIO OUTB to APCM ONLYB.
(A pg. 28)
Jump Search
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (A pg. 79)
during playback (or Live Memory Playback).
Press JUMP – or JUMP +.
● To advance forward or back, press JUMP – or JUMP +
repeatedly within 5 seconds of each press to continue jump.
● Depending on the time from where you want to start jump search,
the first press of JUMP – or JUMP + will not necessarily lead to a
jump of the selected time interval. The first press will lead to a
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45
min/ 00 min). The subsequent jumps will then be in accordance
to the selected time interval.
● When you cannot advance any further (beginning or end of
programme reached), the message AUNABLE TO GO BACK
ANY MOREB appears on the screen and the on-air screen
resumes. In such a case, press S, O or o.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the programme. Pressing
JUMP –
or
JUMP +
will
result a jump to the scene at the 30 minutes point or 45 minutes point
respectively as illustrated below. At the subsequent press, the scene
will jump to the 15 minutes point or 1 hour point respectively,
according to the selected time interval, which in this case is
A
15 MIN
B
.
Marking Positions To Play Back Again Later
It is possible to mark positions (up to 999 points) where you want
to play back once again later, and start playback from a marked
position. Marking onto the disc when recording is helpful to locate
a start point when you play back the disc later.
To mark positions:
During playback, press MARK at
positions you want to mark.
● AMARKB appears on the TV screen.
You can easily locate the marked
positions using S or T when
you play back the disc.
To delete the marked positions:
While paused, press S or T to
locate a marked position you want to
delete, then press MARK.
● Crossed AMARKB appears on the
TV screen, and the marked position
is deleted.
NOTE:
When a monaural programme changes to a stereo programme
while recording, a mark signal is automatically recorded.
Time counter
Beginning of programme
Current scene
End of programme
0 min
30 min 1 h
40 min 1 h 15 min
15 min
45 min
MX1SEU_00.book Page 40 Monday, December 6, 2004 2:01 PM