Filter
Top Products
Masterpage:Right+
EN 87
Filename [MX1SEU_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 87Monday, 6 December 2004 14:01
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
Format A DVD-RAM Disc
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press DE to select AHDD/DVD SET UPB, then press G.
4 Press DE to select ADISC SET
UPB, then press G.
5 Press FGDE to select
AFORMATB, then press
ENTER. Press DE to select
AOKB, then press ENTER.
6 Press DE to select
AEXECUTEB, then press
ENTER.
Format A DVD-RW Disc
1 Perform steps 1 to 4 of AFormat A DVD-RAM DiscB as above
before continuing.
2 Press FGDE to select AFORMATB, then press ENTER. Press
DE to choose AVR MODEB or AVIDEO MODEB, then press
ENTER when ADISC WILL BE FORMATTEDB appears on the
TV screen.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3 Press DE to select AEXECUTEB, then press ENTER.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● It is impossible to format DVD-R discs.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 59)
Format A Disc (DVD Deck Only)
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
● Never turn off the unit or disconnect the mains power cord
while ANOW FORMATTING...B is displayed on the TV screen.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Load a DVD-RAM/RW disc to format.
rtwe
ENTER
SET UP
CABLE/SAT
DVDTV
Video
Video
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
FINALISE
CANC. FINALIS.
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
HDD SET UP
DVD SET UP
DISC SET UP
FORMAT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
MX1SEU_00.book Page 87 Monday, December 6, 2004 2:01 PM