JVC 1204MNH-SW-VE DVD VCR Combo User Manual


 
Filename [MX1SEU_13Subsidiary.fm]
Masterpage:Left+
80 EN
SUBSIDIARY SETTINGS
Page 80Monday, 6 December 2004 14:01
DISPLAY SET
8 SUPERIMPOSE ^ OFF / AUTO
When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (A pg. 20)
OFF:
To turn off superimposed indications.
AUTO:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
NOTES:
Even when ASUPERIMPOSEB is set to AOFFB, you can display
the various operational indicators by pressing ON SCREEN. To
clear the operational indicators, press ON SCREEN again.
When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 71)
When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8 BLUE BACK ^ OFF / ON
When this function is set to AONB, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals,
set this function to AOFFB.
8 DIMMER ^ BRIGHT / DIMMED
You can change the brightness of the front display panel.
BRIGHT:
Normally select this.
DIMMED:
To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8 POWER SAVE ^ OFF / ON
When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
NOTES:
During Power Save mode ^
^ the front display panel will be turned off.
^ the Just Clock function (A pg. 86) does not work.
Power Save does not work when ^
^ the unit is in the Timer mode.
^ the unit’s power is turned off after timer-recording or Instant
Timer Recording.
^ the Automatic Satellite Programme Recording mode is
engaged. (A pg. 53)
^ AL-2 SELECTB is set to ADECODERB , ASAT VIDEOB or ASAT
S-VIDEOB. (A pg. 72)
It takes some time for the unit to complete initialisation after you
turn on the unit power, with AWAKE UPB blinking on the front
display panel.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 10
different languages. Though Auto Set Up selects the language
automatically (A pg. 19), you can change the language setting
manually as required.
For details, refer to AOn-screen Language SetB (A pg. 20)
MX1SEU_00.book Page 80 Monday, December 6, 2004 2:01 PM