JVC 1204MNH-SW-VE DVD VCR Combo User Manual


 
Filename [MX1SEU_13Subsidiary.fm]
Masterpage:Left+
88 EN
SUBSIDIARY SETTINGS
Page 88Monday, 6 December 2004 14:01
Finalising DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalised in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Title names input in the Library Database Navigation are
registered as title names in the DVD menu. (A pg. 58)
Before finalising
It is possible to record on a blank space.
It is possible to enter title names. (A pg. 58)
It is possible to delete titles. (A pg. 59)
It is impossible to overwrite recorded areas of DVD-R discs.
Available recording capacity does not increase even if a recorded
title is deleted from a DVD-R disc.
It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalised.
After finalising (For DVD-R/RW (Video mode) discs)
Video and audio that have been recorded by then are recorded in
conformity to the DVD Video standard, enabling you to play back
the discs as DVD VIDEO discs.
Although DVD-R/RW discs finalised on this unit become playable
on DVD players compatible with DVD-R/RW discs, some discs
still may not play, for which JVC cannot take responsibility.
Marked points marked before finalising will be deleted, and titles
will be divided automatically into AchaptersB approximately every
5 minutes. (A pg. 27)
Depending on the DVD players and DVD-R/RW discs used, and
on the conditions of recording, it may not be possible to play back
the discs. In this case, play back the discs on this unit.
Additional recordings become impossible.
Finalise A DVD-R/RW Disc
1 Perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 87)
before continuing.
2 Press FGDE to select AFINALISEB, then press ENTER.
For DVD-R/RW (Video mode) discs, the background selection
screen will appear. Press FGDE to select the desired
background from a selection of 18 backgrounds.
3 Press DE to select AOKB, then press ENTER.
4 Press DE to select AOKB, then press ENTER.
5 Press SET UP to return to the normal screen.
Menu screen is cleared.
Once a DVD-R/RW (Video mode) disc has been finalised, the
displays for original and play list do not appear. Only display for
library appears.
Once a DVD-RW (VR mode) disc has been finalised, it can be
played on DVD players compatible with VR mode.
Cancel The Finalisation Of A DVD-RW Disc
1 Load a DVD-RW disc to cancel the disc finalisation, and
perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 87)
before continuing.
2 Press FGDE to select ACANC. FINALIS.B, then press ENTER.
3 Press DE to select AEXECUTEB, then press ENTER.
4 Press SET UP to return to the normal screen.
When the disc finalisation is cancelled, the mode in which the
disc was formatted is restored, making the disc recordable.
(A pg. 7, 87)
Finalise A Disc (DVD Deck Only)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
Load a DVD-R/RW disc to finalise.
rtwe
ENTER
SET UP
CABLE/SAT
DVDTV
MX1SEU_00.book Page 88 Monday, December 6, 2004 2:01 PM