JVC HR-J449MS VCR User Manual


 
23
Manual Clock Set
SET DATE AND TIME
4
Press MULTI-FONCTIONS %fi to set the hour, then
press OK. The “minutes” display begins blinking.
Repeat the procedure to set the minutes, day, month
and year.
SET JUST CLOCK
5
The default setting is “M.”. Set as desired by pressing
MULTI-FONCTIONS %fi, then press OK.
If you set to “A.”, you can disregard the next step as
you won’t be able to receive regular clock adjust-
ments.
SET CLOCK DATA SOURCE
PRESET
6
The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press MULTI-
FONCTIONS %fi to set the preset position to the
number representing the station transmitting clock
setting data (TF1, FR2, etc.), then press OK.
START CLOCK OPERATION
7
Press MENU.
Auto Clock Set
SET CLOCK
AUTOMATICALLY
4
At the Clock Set screen,
press MULTI-FONCTIONS
. The Auto Clock Set
screen appears and clock
setting begins.
If "CHAINE" isn't set to
the preset position on
which Auto Clock Set
data is received,
"ERREUR" appears, and then the screen from step 3
reappears. To set "CHAINE", press OK to place the
cursor next to it, then cycle through the numbers by
pressing MULTI-FONCTIONS %fi until the number
representing the position in which the station
transmitting clock setting data (TF1, FR2, etc.) is
stored appears.
RETURN TO NORMAL
SCREEN
5
Once clock setting is completed, press MENU to return
to the normal screen.
%
NOTES:
Just Clock (when set to "M.") enables adjustment of the
recorder's built-in clock every hour on the hour, except for 11
o'clock in the evening and midnight.
Just Clock is not effective when . . .
the recorder’s power is on (unless the recorder is tuned to
the same preset selected in the Clock Set screen).
the recorder is in the Timer mode.
a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
The recorder’s clock is automatically adjusted at the start/end
of Summer Time.
Auto clock setting and Just Clock may not function properly
depending on the reception condition.
During Manual clock setting, if the day and month data are
invalid (such as 31st April), the month digits are cleared
automatically and the day digits begin blinking. Input the
correct data.
If, in step 4 of the Manual clock setting procedure, the year
digits are automatically cleared and the day digits begin
blinking, it is possible that you have input 29th February for a
non-leap year. Input the correct data.
12
45
3
6
8
0
7
9
2
4
1
3
MULTI-FONCTIONS
OK
HEURE AUTO
VEUILLEZ ATTEDRE S.V.P.
HORL. AUTO:M.
CHAINE 1
MENU