Filter
Top Products
35
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
RECORDING
Basic
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press CHAINE +/– or the NUMBER keys to select the
preset you wish to record.
● The CHAINE dial can also be used to select a preset.
SET TAPE SPEED
3
Press (VN/LD). Check the VN/LD indicator on the
recorder display panel to confirm the selected tape speed.
START RECORDING
4
Press and hold q and 4 on the remote control, or
press q on the recorder.
PAUSE/RESUME
RECORDING
5
Press 6. Press 4($) to resume recording.
STOP RECORDING
6
Press 5 on the remote control or 5/8 on the recorder.
Then press 5/8 to remove the cassette.
Accidental erasure prevention
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
q
12
45
3
6
8
0
7
9
2
4
1
3
CHAINE
VN/LD
CHAINE
NUMBER
Turn on the TV and select the AV mode.
B.E.S.T. takes place at the beginning of both the
first VN and the first LD recording after inserting
the cassette (੬ pg. 36).