![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/f1/ff11a1b5-bb12-bb04-6937-bd4e7fd29bcc/ff11a1b5-bb12-bb04-6937-bd4e7fd29bcc-bg24.png)
36
RECORDING (cont.)
B.E.S.T.
Picture System
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is “M.”.
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The recorder power comes on automatically.
ACCESS MENU PRINCIPAL
SCREEN
2
Press MENU twice.
ACCESS AUTRES
REGLAGES SCREEN
3
Move the highlight bar
(pointer) to "AUTRES
REGLAGES" by pressing
MULTI-FONCTIONS %fi,
then press OK.
CONFIRM B.E.S.T. STATUS
4
The default setting is “M.”.
If this is the case, go to
step 5. If not, press MULTI-
FONCTIONS
fi
to move
the highlight bar (pointer)
to “B.E.S.T.”, then press
MULTI-FONCTIONS to
set to “M.”.
RETURN TO NORMAL
SCREEN
5
Press MENU.
START RECORDING
6
Press and hold q and 4 on the remote, or q on the
recorder.
● The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
● When the "BEST" indicator begins blinking, that
means adjustment is complete.
● Pressing the recorder's q button while "BEST" is
displayed does not start Instant Timer Recording
(੬ pg. 41).
Turn on the TV and select the AV mode.
q
1
3
OK
Display Panel Indication
As the tape check progresses, the “—” marks on the display
panel increase upward. Once the "BEST" indicator starts
blinking, the check is complete.
HR-J746MS
HR-J449MS
MENU PRINCIPAL
AUTRES REGLAGES
REGL. AUTO. DES CANAUX
REGL. MANUEL CANAUX
REGL. DES NUMEROS GUIDE
REGLAGE DE L'HORLOGE
[5
∞
] =
[MENU] : SORTIE
5
%
MENU
AUTRES REGLAGES
ENR. PROG. AUTO : M.
O.S.D. : M.
B.E.S.T. : M.
SELECTION AV2 : AUX.
[5
∞
] = [ ] : M./A.
[MENU] : SORTIE