Filter
Top Products
50
q
EDITING (cont.)
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
12
45
3
6
8
0
7
9
2
4
1
3
Player
Mini-Plug Cable
(not provided)
(JVC camcorder
only)
VIDEO OUT
EDIT
Recorder
Your recorder
Audio/Video Cable
(not provided)
AUDIO OUT
AUDIO
input
Camcorder
NUMBER "0"
CHAINE
To rear panel TELEC.
connector
VIDEO
input
IMPORTANT
Before you start editing, be sure to select the appropriate colour
system by pressing SYSTEME COULEUR depending on the
system of the connected recorder or camcorder.
੬
p. 51
MAKE CONNECTIONS
1
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO
input connectors.
For HR-J746MS owners...
● When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO G input
connector on your recorder.
For HR-J449MS owners...
● When using a Hi-Fi camcorder, connect its AUDIO
OUT L connector to the AUDIO input connector on
your recorder.
● When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.
SET RECORDER’S INPUT
MODE
2
Press NUMBER key “0” and/or CHAINE so that “F-AU”
appears in place of a channel number.
START CAMCORDER
3
Engage its Play mode.
START RECORDER
4
Engage its Record mode.