Filter
Top Products
32
PLAYBACK (cont.)
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
Press MULTI-FONCTIONS or (™ or £). “™
1” or “£ 1” is displayed on screen, "1" or "-1" on the
display panel and search begins in the corresponding
direction.
● To access index codes 2 through 9, press MULTI-
FONCTIONS or repeatedly until the correct index
number is displayed.
Ex.: To locate the beginning of B from the current
position, press MULTI-FONCTIONS twice.
To locate the beginning of D from the current
position, press MULTI-FONCTIONS once.
● When the specified index code is located, playback
begins automatically.
£ 2
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Current position
Index number
AB C D E F
–2 –1 1 2 3
fi
%
q
12
45
3
6
8
0
7
9
2
4
1
3
REVIEW
MULTI-FONCTIONS
fi
%
RECH. VAR.
M. COMPTEUR
A/B CODE
RECH. SEQ.
%
fi
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
The front display panel tells you how many programmes
have been recorded. If you have, for example, 3
programmes, “REVIEW” and "3" appear and blink. To
watch the first of the 3 programmes, press REVIEW three
times. The recorder searches and begins playback
automatically. You can access a programme as far as 9
index codes away from the current tape position.
NOTES:
●
Instant ReView is not possible while the recorder is in the
Timer mode.
●
The HR-J449MS has the REVIEW button on the recorder as well.