Filter
Top Products
9
( Add Time Button (+DUREE) adds time to end of
recording (5 minutes each time button is
pressed.) ੬ pg. 43
) Daily Button (QTDN) enables timer recording
of daily serials. ੬ pg. 43
q Weekly Button (HEBDO) enables timer record-
ing of weekly serials. ੬ pg. 43
w AUX Button selects recorder's auxiliary input
mode. ੬ pg. 48
e Timer Button (AUTO) — same as button on
recorder. ੬ pg. 43
r Channel +/– Button (CHAINE) — same as
button on recorder. ੬ pg. 35
t DATE +/– Button inputs date of program for
timer recording. ੬ pg. 44
y TV/SAT./MAG. Switch enables remote control
of VCR or connected TV or satellite receiver.
੬ pg. 26, 27
u TV/VIDEO Button switches control between TV
and VCR. ੬ pg. 26
i Fast Forward Button fast-forwards tape ੬ pg. 28;
initiates high-speed forward search. ੬ pg. 30
o Pause Button — same as button on recorder.
੬ pg. 29
p Stop Button — same as button on recorder.
੬ pg. 28
Q Programme Check Button (CONTROLE PROG)
accesses Program screens (next program's
information screen appears each time button is
pressed). ੬ pg. 47
W OK Button enters selections made in on-screen
menus. ੬ pg. 16
E VOL. TV %fi Button controls volume of con-
nected TV. ੬ pg. 26
Installing Batteries
1 Open the battery compartment cover.
2 Insert 2 "R6"-size batteries (provided) in the correct
directions.
3 Replace the cover.
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands. ੬ pg. 26, 27.
● Point the remote control toward the sensor window.
● The maximum operating distance of the remote control
is about 8 m.
NOTE:
If for some reason the remote control doesn't work properly,
remove its batteries, wait a short time and then try again.