JVC HRDVS1EK VCR User Manual


 
34
ADVANCED OPERATIONS (cont.)
Because this recorder includes both a VHS deck and a DV
deck, you can easily use it for dubbing without connecting any
other equipment.
LOAD CASSETTES
1
Insert a VHS (or S-VHS) cassette and a Mini DV
cassette.
SELECT DUBBING
DIRECTION
2
Press when you want playback on the DV deck and
recording on the VHS deck.
OR
Press when you want playback on the VHS deck and
recording on the DV deck.
SET TAPE SPEED
3
Press VHS or DV for the recording deck, then press
SP/LP ( ).
START DUBBING
4
Press DUB for two seconds.
If the tapes have not been rewound, both decks
rewind automatically. The recording deck goes into
Record-Pause mode, and the playback deck goes into
Pause mode.
When both decks have finished rewinding, dubbing
begins automatically.
After dubbing is completed, the decks rewind both
tapes automatically and eject them. The recorder
then shuts off.
NOTES:
If you set the dubbing direction incorrectly, you could erase
an important recording that you wanted to copy. We
recommend conducting a test with unimportant cassettes first.
On the cassette that you are playing (i.e., recording from) we
recommend either setting the erase protection switch to
"SAVE" (if the cassette is a Mini DV cassette), or breaking off
the record safety tab (if the cassette is a VHS cassette).
Tape Dubbing
Dubbing An Entire Cassette
DV
VHS
1 2 3
4 5 6
7
8 9
0
2
T W
4
1
DV VHS
3
DV
VHS
SP/LP
DUB