JVC HRDVS1EK VCR User Manual


 
45
NOTES:
When monitoring the sound during Audio Dubbing, the normal
soundtrack is automatically selected. If you wish to hear the mixed
sound (Hi-Fi + Normal soundtracks), press AUDIO on the remote
control to select "HIFI NORM" (VHS deck only
pg. 30).
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode (VHS deck
only). Check the counter reading before dubbing.
Audio dubbing is also possible using the rear panel AV1 IN/OUT
or AV2 IN/DECODER connector. When using these connectors,
make sure to select the correct input mode in step 3.
Audio dubbing cannot be performed on a VHS/S-VHS
cassette that has had its record safety tab removed, or on a
Mini DV cassette that has had its erase protection switch set
to "SAVE".
When playing back an audio-dubbed tape on the VHS deck,
press AUDIO on the remote control to select the soundtrack
you wish to hear (
pg. 30). When playing back an audio-
dubbed Mini DV tape on the DV deck, set "32kHz MODE" to
"SOUND2" (
pg. 31).
Audio dubbing is not possible using the DV IN/OUT
connector.
START DUBBING
6
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
" " blinks and " " is displayed on the front display
panel.
To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
7
Press STOP to stop the tape in your recorder, and
engage the audio component's Stop mode.
1 2 3
4 5 6
7
8 9
0
2
T W
4
1
DV VHS
3
AUDIO
PAUSE
PLAY
STOP