Filter
Top Products
79
e STANDBY/ON Button — same as button on
recorder.
r Button accesses Program screens/displays
to check the programme that you have pro-
grammed (next programme's information
screen/display appears each time button is
pressed). ੬ pg. 22
t – –:– – (DISPLAY) Button switches display
between clock time, tape remaining time,
counter readings and preset position*. ੬ pg. 17
* Preset position is not displayed during playback.
ENTER Button is used for TV channel selection.
੬ pg. 50
y ON/OFF Button turns on and off the playback
effect. ੬ pg. 28
u DAILY Button enables timer recording of daily
serials. ੬ pg. 19, 21
i WEEKLY Button enables timer recording of
weekly serials. ੬ pg. 19, 21
o ‰ Button engages timer-standby mode.
੬ pg. 19, 21
p AUX Button selects recorder's auxiliary input
mode. ੬ pg. 40, 42
Q DATE +/– Button inputs date of programme for
timer recording. ੬ pg. 20
W TV PROG +/– Button — same as button on
recorder. ੬ pg. 15
E VHS Button enables operations on VHS deck.
੬ pg. 12
R DV Button enables operations on DV deck.
੬ pg. 12
T Fast Forward [FF] Button — same as button on
recorder. ੬ pg. 12, 13
Y Play Button — same as button on recorder.
੬ pg. 12, 13
U Pause Button — same as button on recorder.
੬ pg. 13
I
@
#
Button initiates functions such as Index
Search ੬ pg. 29, variable-speed search, frame
by frame playback. ੬ pg. 13
TV +/–Button controls volume of connected
TV. ੬ pg. 50
O R.A. EDIT Button accesses R.A. EDIT screen.
੬ pg. 36
P IN/OUT Button registers edit-in or edit-out
point for Random Assemble Editing. ੬ pg. 36
a JOG/SHUTTLE Button enables use of the
remote control's JOG dial/SHUTTLE ring.
੬ pg. 13
s SHUTTLE Ring performs forward and reverse
slow-motion and search during Still or Play
mode. ੬ pg. 13
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands. ੬ pg. 50, 51.
● Point the remote control toward the sensor window.
● The maximum operating distance of the remote control
is about 8 m.
NOTES:
●
When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
●
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.