Filter
Top Products
48
ADVANCED OPERATIONS (cont.)
AV2 SELECT Setting
Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN/DECODER
connector of this recorder.
1 Press MENU to access the Main Menu screen.
2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
#
.
3 Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
4 Press OK or
#
to select "AV2", "DECODER" or "SAT".
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite receiver connected to
the AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
c–SAT : To view a satellite programme with the TV set while the recorder is in Timer
mode, in Stop mode, recording or turned off. (੬ pg. 57)
5 Press MENU to return to normal screen.
● If you have a satellite receiver or a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back
to appropriate mode after editing.
● If you're not connecting a satellite receiver or a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to
"AV2".
● The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed
from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a satellite
receiver or a decoder, be sure to set "AV2 SELECT" back to appropriate mode.
● If the AV1 OUT switch on the rear panel is set to Y/C, it is impossible to set "AV2 SELECT" to "DECODER".
AV1 SELECT Setting
Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV1 IN/OUT connector of
this recorder.
1 Press MENU to access the Main Menu screen.
2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
#
.
3 Press %fi to move the highlight bar (pointer) to "AV1 SELECT".
4 Press OK or
#
to select "VIDEO" or "S-VIDEO".
a–VIDEO : If a connected device's output is compatible only with regular video
signals, set "AV1 SELECT" to "VIDEO".
b–S-VIDEO : If a connected device's output is compatible with Y/C signals, set "AV1
SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
quality S-VHS pictures.
5 Press MENU to return to normal screen.
● The "AV1 SELECT" setting is for signal input to the AV1 IN/OUT connector.
● If "AV2 SELECT" is set to "DECODER", it is impossible to set "AV1 SELECT" to "S-VIDEO".
MODE SET
S-VHS/AUDIO OUT AUTO
O. S. D. ON
AUTO TIMER OFF
DIRECT REC ON
POWER SAVE OFF
AV1 SELECT VIDEO
AV2 SELECT AV2
[5∞] =
[MENU] : EXIT
MODE SET
S-VHS/AUDIO OUT AUTO
O. S. D. ON
AUTO TIMER OFF
DIRECT REC ON
POWER SAVE OFF
AV1 SELECT VIDEO
AV2 SELECT AV2
[5∞] =
[MENU] : EXIT
S-VHS/AUDIO OUT Setting
Set "S-VHS/AUDIO OUT" to the appropriate mode depending on the selection of the playing deck (VHS or DV) for editing.
1 Press MENU to access the Main Menu screen.
2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
#
.
3 Press %fi to move the highlight bar (pointer) to "S-VHS/AUDIO OUT".
4 Press OK or
#
to select "AUTO", "VHS" or "DV".
a–AUTO : The recorder outputs the signals from the deck being used automatically.
The on-screen display is also output.
b–VHS : The recorder outputs only the signals from the VHS deck. The on-screen
display is not output.
c–DV : The recorder outputs only the signals from the DV deck. The on-screen dis-
play is not output.
5 Press MENU to return to normal screen.
● If you select "VHS" or "DV", the Main Menu screen will not appear even when MENU is pressed. To change the menu settings,
connect your TV to the recorder's AV1 IN/OUT connector, not to the S OUT/AUDIO OUT connectors.
MODE SET
S-VHS/AUDIO OUT AUTO
O. S. D. ON
AUTO TIMER OFF
DIRECT REC ON
POWER SAVE OFF
AV1 SELECT VIDEO
AV2 SELECT AV2
[5∞] =
[MENU] : EXIT