Filter
Top Products
51
Satellite Receiver Multi-
Brand Remote Control
Your remote control can operate the basic functions of your
satellite receiver set. In addition to JVC satellite receivers, other
manufacturer’s satellite receivers can also be controlled.
Before you start . . .
● Turn on the satellite receiver using its remote control.
● Set the remote control's VCR/TV/SAT switch to SAT.
SET SATELLITE RECEIVER
BRAND CODE
1
Refer to the chart below. While holding down on the
recorder's remote control, enter your satellite receiver’s
brand code using the NUMBER keys, then press STOP.
Check if the satellite receiver's power goes off as it
should. If it does, try other operations (੬ step 2).
● Once you have set the remote control to operate the
satellite receiver, you don't have to repeat this step
until you replace your remote control's battteries.
● Some satellite receiver brands have more than one
code. If the satellite receiver does not function with
one code, try entering another.
OPERATE SATELLITE
RECEIVER
2
Press the corresponding button: , TV PROG +/–,
NUMBER keys.
● For VIDEOWAY or some other brands of satellite
receiver, you must press after having pressed the
NUMBER keys.
● The NUMBER buttons may not function with some
satellite receivers.
● To return the remote to video recorder control, set its
VCR/TV/SAT switch to VCR.
IMPORTANT
Although the provided remote control unit is compatible with
JVC satellite receivers, as well as many other models, it may not
work with your satellite receiver, or in some instances, may
have limited function capability.
SATELLITE TUNER BRAND CODE
JVC 72, 73
AMSTRAD 60, 61, 62, 63
BT 72
CANAL + 81
FINLUX 68
GRUNDIG 64, 65
HIRSCHMANN 64
ITT 68
JERROLD 75
KATHREIN 70, 71
LUXOR 68
MASPRO 70
NOKIA 68
PACE 65, 67
PANASONIC 74
PHILIPS 66
RFT 69
SALORA 68
SIEMENS 64
SKYMASTER 69
VIDEOWAY 76
WISI 64
1 2 3
4 5 6
7
8 9
0
2
T W
4
1
DV VHS
3
TV PROG+/–
NUMBER
VCR/TV/SAT
STOP