Filter
Top Products
42
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 43.
A
When Using Your Video Recorder As The Source
Player ...
... connect its AV1 IN/OUT connector to the
recording deck.
B
When Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
C
If Another Recorder Is Compatible With The Y/C
Signal ...
... connect your recorder
's
AV1 IN/OUT connector to
another recorder.
With C connection ...
● When using your recorder as the recording deck, set
"AV1 SELECT" to "S-VIDEO" and "AV2 SELECT" to
"AV2" (੬ pg. 48).
● When using your recorder as the source player, set
the AV1 OUT switch on the rear panel to Y/C
(੬ pg. 6).
SELECT DECK
2
Press VHS or DV.
● When using your recorder as the source player, set
"S-VHS/AUDIO OUT" to "VHS" or "DV", depending
on the deck being selected (੬ pg. 48).
SET RECORDING DECK’S
INPUT MODE
3
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select “L-1” for the AV1 IN/
OUT connector, or “L-2” for the AV2 IN/DECODER
connector, depending on the connector being used.
● When using the AV2 IN/DECODER connector, set
"AV2 SELECT" to the appropriate mode. (੬ pg. 48)
SET EDIT MODE
(VHS DECK ONLY)
4
See "Picture Control" on page 33.
START SOURCE PLAYER
5
Engage its Play mode.
START RECORDING DECK
6
Engage its Record mode.
1 2 3
4 5 6
7
8 9
0
2
T W
4
1
DV VHS
3
NUMBER "0"
DV
TV PROG
VHS
ADVANCED OPERATIONS (cont.)