Basic operations
15
Basic operations
English
We recommend you to set the display language, TV monitor type, analog audio output and digital output before using
the unit, depending on circumstances, by following the procedure below.
When turning on the unit for the first time, the DVD PLAYER SET UP display automatically appears. In such a case,
perform the following procedure from step 2.
See “Changing the initial settings” on and after page 56 for details about each setting item.
1 Press and hold down CHOICE for a few
seconds to bring up the first page of the DVD
PLAYER SET UP display.
The pull-down menu of the “ON SCREEN
LANGUAGE” is already open.
ON SCREEN LANGUAGE selection
2 Use 5/∞ to select a desired language.
You can select the on-screen language for the
preference displays, etc. from among English,
Spanish and French.
3 Press ENTER.
The second page is shown, in which the pull-down
menu of the “MONITOR TYPE” is already open.
MONITOR TYPE selection
4 Use 5/∞ to select a desired monitor type.
You can select the monitor type according to your TV.
• For the normal (conventional) TV, select “4:3 LB”
or “4:3 PS.”
• For the wide-screen TV, select “16:9 AUTO” or
“16:9 NORMAL.”
See page 59 for details about each mode.
5 Press ENTER.
The third (final) page is shown, in which the pull-
down menu of the “ANALOG OUT” is already
open.
ANALOG OUT selection
6 Use 5/∞ to select a desired analog output
signal type.
You must set this item correctly when you play back
a DVD VIDEO disc recorded with surround
multichannel audio.
• When connecting with a surround decoder, select
“2-CH DOLBY SURROUND.”
• When connecting with a stereo amplifier/receiver
or television set, select “2-CH STEREO.”
• When connecting the unit’s 5.1 channel audio
outputs to an amplifier equipped with 5.1-channel
input, select “MULTI CHANNEL.”
See page 61 for details.
The initial setup before using the unit
TV2
2
TV1
1
TV3
3
TV5
5
TV4
4
TV6
6
TV8
8
TV7
7
TV9
9
TV0
0
TV-/--
10
MUTING
+10
TV/VIDEO
CANCEL
TITLE/
GROUP
RETURN
VFPAUDIOSUB TITLEREPEAT
ANGLEDIGEST
3D
PHONIC
ZOOM
AMP VOL
PROGRESSIVE
SCAN
fs/Rate
RM-SXV011J
REMOTE CONTROL
OPEN/
CLOSE
TV DVD
NEXTPREVIOUS
SELECT STROBECLEAR
SLOW
-
SLOW+
VOL
-
VOL+
CH
+
CH
-
T
O
P
M
E
N
U
M
E
N
U
O
N
S
C
R
E
E
N
C
H
O
I
C
E
ENTER
STANDBY/ON
TV DVD
PAGE
5/∞
ENTER
CHOICE
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
DVD PLAYER SET UP
ENGLISH
SPANISH
FRENCH
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
MONITOR TYPE
4:3 L.B.
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3/JPEG
MP3
DVD PLAYER SET UP
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
DIGITAL AUDIO OUTPUT
STREAM/PCM
ANALOG OUT
DOLBY PROLOGIC
D. RANGE COMPRESSION
ON
DVD PLAYER SET UP
2-CH DOLBY SURROUND
2-CH STEREO
MULTI CHANNEL
S600(J).book Page 15 Friday, May 3, 2002 5:52 PM