Filter
Top Products
Basic operations
20
Basic operations
When the resume mode is set to “DISC RESUME”
¶ While stopped, or no disc is inserted
1 Press 0 OPEN/CLOSE to insert a disc whose interrupted position is
memorized.
After loading the disc, the display window on the front panel shows “----
RESUME” and “RESUME STOP” appears at the bottom of the opening
display.
If a disc for which you want to resume playback is already set in the disc tray,
you need not to follow this step.
2 Press 3.
The display window shows “RESUME PLAY” and the unit resumes playback from the position you interrupted
playback.
The unit keeps the memory for the position on a disc where you interrupted playback, even though you remove the
disc from the disc tray and set it back again.
Of course, the unit keeps the memory when the disc remains in the disc tray since the last playback.
• To play back a disc from the beginning (instead of the interrupted position)
After loading the disc, press 7 before pressing 3 to start playback.
Pressing 7 while the disc is stopped clears the memory for the interrupted position.
Every time you interrupt playback, the position is memorized as the “resuming” point.
When the resume mode is set to “ON”
¶ While the disc you interrupted playback last time* is still on the disc tray (*by pressing 7).
Press 3.
The unit resumes playback from the position you interrupted playback.
If you press 3 then 7