Filter
Top Products
Basic operations
19
Basic operations
English
Resuming playback
The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later.
There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 63 for details
about how to set the resume mode.
• When purchasing the unit, the resume mode is initially set to “ON”.
• You can deactivate the resume mode by setting “RESUME” on the “OTHERS” preference display to “OFF”.
.
¶ During playback
When the resume mode is set to “DISC RESUME”
Press 7
.
The unit stops playback and memorizes the interrupted position. After pressing 7, the display window on the front
panel shows “----RESUME.”
In this condition, a memory of the interrupted position is not cleared if you press 0 OPEN/CLOSE to open the disc
tray, or press DVD STANDBY/ON on the remote control unit or STANDBY/ON on the front panel to turn off the
unit.
• The position interrupted is also memorized by pressing OPEN/CLOSE, DVD STANDBY/ON on the remote control unit or
0 OPEN/CLOSE, STANDBY/ON on the front panel. In this case, “----RESUME” is not shown on the display window.
• If you do not want the disc played to resume playback, press 7 while stopped.
• It memorizes positions for the last 30 discs.
• If you interrupt playback of a disc which you resumed playback, the memory is updated to store the new interrupted position.
• When the unit has already memorized positions for 30 discs, memo