Filter
Top Products
Changing the initial settings
61
Changing the
initial settings
English
Menu items Setting options Notes/examples
ANALOG OUT
To play back a DVD VIDEO disc
recorded with surround
multichannel audio correctly, this
setting must be properly made
according to your audio system.
• 2-CH DOLBY SURROUND
Should be selected when you enjoy
multichannel surround audio by
connecting the unit’s AUDIO OUT
jacks to a surround decoder.
• This function does not work when
the 3D PHONIC function is activated
(see page 40).
• “2-CH DOLBY SURROUND” and
“2-CH STEREO” settings affect only
the output signal from the AUDIO
OUT jacks when playing back a DVD
VIDEO disc recorded with surround
multichannel audio.
• Some DVD AUDIO discs prohibit the
2-channel down-mix. For such a disc,
you cannot get the down-mixed
signal even if you set “ANALOG
OUT” to “2-DOLBY SURROUND” or
“2-CH STEREO.”
•2-CH STEREO
Should be selected when you enjoy
conventional 2-channel stereo
audio by connecting the unit’s
AUDIO OUT jacks to a stereo
amplifier/receiver or television set,
or when you duplicate audio of a
DVD VIDEO disc recorded with
surround audio to your MD,
cassette, etc.
• MULTI CHANNEL
When you enjoy multichannel
surround audio by connecting the
unit’s 5.1-channel audio outputs to
an amplifier equipped with 5.1-
channel inputs.
D. RANGE COMPRESSION
When enjoying a DVD VIDEO disc
recorded with the Dolby Digital
format at low or middle volume,
this setting makes you hear sound
comfortably.
•AUTO
Audio is played back with the
dynamic range compressed.
• This function works only when
playing back a disc recorded with
Dolby Digital. The setting is not
effective for other discs.
• This function does not work when
the 3D PHONIC function is activated
(see page 40).
•ON
Audio is always played back with
the dynamic range compressed.
S600(J).book Page 61 Friday, May 3, 2002 5:52 PM