Filter
Top Products
ENGLISH
104
AV Menu items
• If you change the
Amplifier Gain
setting
from
High Power
to
Low Power
while the
volume level is set higher than
30
, the unit
automatically changes the volume level to
Volume 30
.
• After you change any of
Menu Language
/
Audio Language
/
Subtitle
settings, turn
off then on the power, and re-insert the disc
(or insert another disc) so that your setting
takes effect.
• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
• When you select
16:9
for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
• Even if
4:3 Pan Scan
is selected, the screen
size may become
4:3 Letter Box
for some
discs.
Using Bluetooth devices
General
• While driving, do not perform complicated
operation such as dialing the numbers, using
phone book, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not be connected
to this unit depending on the Bluetooth
version of the device.
• This unit may not work for some Bluetooth
devices.
• Connecting condition may vary depending on
circumstances around you.
• When the unit is turned off, the device is
disconnected.
Icons for phone types
• These icons indicate the phone type set on the
device.
: Cellular phone
: Household phone
: Office
: General
: Other than above
Warning messages for Bluetooth operations
•
Connection Error
: The device is registered
but the connection has failed. Use
Connect
to connect the device again. (☞ [85])
•
Error
: Try the operation again. If
Error
appears again, check if the device supports the
function you have tried.
•
Device Unfound
: No available Bluetooth
device is detected by
Search
.
•
Loading
: The unit is updating the phone
book and/or a text message.
•
Please Wait...
: The unit is preparing to
use the Bluetooth function. If the message
does not disappear, turn off and turn on the
unit, then connect the device again (or reset
the unit).
•
Reset 08
: Check the connection between
the adapter and this unit.
KDNX5000_J.indb 104KDNX5000_J.indb 104 23/1/07 7:01:13 pm23/1/07 7:01:13 pm