Filter
Top Products
95
Menu items Selectable settings
(Initial setting)
EQ
Flat, Hard Rock, R&B, Pop, Jazz, Dance Music,
Country, Reggae, Classic, User 1, User 2,
User 3
☞ [98]
Sound
Fader/Balance
Adjust fader—speaker output balance between the front
and rear speakers. (
00
)
F06
: front only
R06
: rear only
• When using a two-speaker system, set the fader to the
center (
00
).
Adjust balance—speaker output balance between the left
and right speakers. (
00
)
L06
: left only
R06
: right only
Volume Adjust
Adjust and store auto-adjustment volume level for each
source, comparing to the FM volume level. The volume
level will automatically increase or decrease when you
change the source.
–12
to
+12
(
00
)
Subwoofer
Adjust the settings below in the submenu:
•
Phase
: Subwoofer phase. Select either
Normal
or
Reverse
, which reproduces a better sound.
•
Level
: Subwoofer output level.
00
to
08
(
04
)
High Pass Filter Through
: Select when the subwoofer is not connected.
On
: Select when the subwoofer is connected.
Crossover
Adjust the crossover frequency between the front/rear
speakers and the subwoofer.
55 Hz, 85 Hz, 125 Hz
Amplifier Gain
You can change the maximum volume level of this
receiver.
Amplifier Off
: Deactivates the built-in amplifier.
Low Power
: Volume 00 to 30 (Select this if the maximum
power of the speakers is less than 50 W)
High Power
: Volume 00 to 50
Fader/Balance
Exit
F02
L02
AV Menu items
KDNX5000_J.indb 95KDNX5000_J.indb 95 23/1/07 7:01:02 pm23/1/07 7:01:02 pm