Filter
Top Products
13
OGJ
4-3 Setting the date and time
4 PREPARATION (contd.)
1. Turn the power ON.
Check the connections and press the [POWER] switch
ON.
2. Display the main menu.
Press the [MENU] button to display the main menu
screen.
Refer to “Jog/shuttle dial operation” on page 16 and set
the jog dial function with the shuttle dial operation.
3. Display the [CLOCK SET] screen.
Set the cursor on [CLOCK SET] with [JOG ]. Turn the
shuttle dial to display the [CLOCK SET] screen.
4. Set the month.
Set “month” with [JOG – +].
5. Set the day.
Set the blinking cursor on “D” with [JOG p[] and set
the day with [JOG – +].
6. Set the year, hour and minute.
Repeat the procedure for step 5 for setting.
7. Enter.
When all settings are complete, press the [MENU] button
twice to restore the normal screen.
Note:
● If the date is changed when there is recorded data on
the hard disk, make sure the recording date and time
do not overlap.
Otherwise, playback operation, skip search and direct
search may not function correctly.
Characters
selected with
the cursor are
highlighted.
[MENU] button
Jog dial
Shuttle dial
f
MENU
SEARCH
S
E
L
E
C
T
REV FWD
EXECUTE
SKIP/ALARM
SEARCH
3.
[
CLOCK SET
]
DAYL GHT SAVING OFFI
MDY H M
1 1 2001
0
:
00
JOG
Blinking
[
CLOCK SET
]
DAYL GHT SAVING OFFI
MDY H M
1 1 2001
0
:
00
JOG
Blinking
4-4 Daylight-saving compensation
Use the <DAYLIGHT SAVING> menu switch on the CLOCK
SET setting screen to turn the Daylight Saving mode ON or
OFF.
When <DAYLIGHT SAVING> is “ON”, the set time is
advanced one hour.
• When setting the time, make sure the <DAYLIGHT
SAVING> switch is “OFF”.
When the unit is shipped, this switch is set to “OFF”.
• Clock setting is not possible during timer recording.
During daylight-saving time Standard time
1. Set the time one hour behind the actual time.
2. After setting the time, set the <DAYLIGHT SAVING>
switch to “ON”.
• The time advances one hour.
3. At the end of the daylight-saving time season, set the
<DAYLIGHT SAVING> switch to “OFF”.
• The standard time is displayed.
1. Set the clock to the actual time.
2. When the daylight-saving season starts, set the <DAY-
LIGHT SAVING> menu switch to “ON”.
• The display time advances one hour.
4.
5.