Filter
Top Products
129
2 Click [JVC Log Setting]
The JVC log setting screen appears.
3 Specify the retention days
● Select this check box to delete unnecessary logs and
reduce the load on this device. Old logs will be deleted
automatically.
4 Click [OK]
You can save maintenance information on a USB flash
memory.
1 Connect a USB flash memory to a SERIAL
terminal on the front panel
2 Double-click [5. Maintenance Info] on the
desktop
The [Maintenance Information] screen appears.
3 Click [Export maintenance information]
4 Select a period and click [Export]
A folder called “NVR_Log” will be created on the USB
flash memory and the maintenance information and log
will be stored.
Caution:
● To disconnect the USB device from the unit, be sure to
perform “remove” by right-clicking the target removal disk
on the explorer.
Saving Maintenance
Information
Item Description
Operating time For displaying the runtime of this
unit.
Power fail history The power failure history
appears.The [Power fail history] is
empty if no power failure has
occurred in the past.
Version
information
For displaying the version
information of this unit.
Export
maintenance
information
For displaying the save maintenance
information screen.
Turn off WARNING
light
For turning off the WARNING light
on the front panel.
Close Closes the [Maintenance
Information] screen.