Filter
Top Products
Basic operations
Basic operations
17
XV-NA7SL/LET0212-004A/English
8 Use 5/∞ to select a desired digital output
signal type.
You must set this item correctly when you connect
the unit to an external surround decoder or D/A
convertor (including an amplifier/receiver with
built-in surround decoder or D/A convertor).
(If you do not connect the unit to such a device,
you do not have to set this item.)
• When connecting with a Dolby Digital decoder,
select [DOLBY DIGITAL/PCM].
• When connecting with a DTS or MPEG
Multichannel decoder, select [STREAM/PCM].
• When connecting with other digital devices,
select [PCM ONLY].
9 Press ENTER.
The TV screen returns to show the opening
display.
NOTES
• This setting may not be necessary except when turning
on the power after purchasing the unit.
• You can also set these items, as well as other
preferences, by pressing CHOICE briefly to bring up the
preference display. See "Changing the initial settings"
on and after page 57 for details.
XV-NA7SL(B).book Page 17 Wednesday, July 31, 2002 1:00 PM