Getting started
Getting started
7
XV-NA7SL/LET0212-004A/English
Connection to a TV equipped with an S-video jack
If your TV has an S-VIDEO input, you can get better picture quality by connecting it with the S-VIDEO output of the unit
using an S-video cable instead of connecting the video input of the TV to the VIDEO jack of the unit.
To connect to a TV with the SCART connector
You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear audio
sound with better quality, connect the AUDIO output to your audio equipment.
Set the VIDEO SIGNAL SELECTOR correctly according to your TV
• If the TV only accommodates the composite video signal, set the switch to "COMP./RGB."
• If the TV accommodates Y/C signals, set the switch to "Y/C" so that you can enjoy better-quality pictures.
• If the TV accommodates RGB signals, set the switch to "COMP./RGB," and set the unit to supply RGB signals using the
procedure shown below.
If you connect the unit to a PAL TV, set the NTSC/REMOTE/PAL switch to "REMOTE" and select PAL system from the
remote control unit (see page 9).
NOTES
• Connect the unit to a PAL TV or multi-scan TV.
• Even if cables are connected to both the VIDEO OUT jack and S-VIDEO jack, video signal will only be transmitted from the port
selected by the settings.
• You must change the switch position while the unit power is off. Otherwise, the changed setting is not effective.
AV COMPU LINK
AV OUT
PCM / STREAM
COAXIAL
SUBWOOFER
CENTER
LEFT
RIGHT
REAR FRONT
OPTICAL
VIDEO
S-VIDEO
DIGITAL OUTAUDIO OUT
COMPONENT
YP
B PR
VIDEO OUT
VIDEO SIGNAL SELECTOR
Y/C REMOTE
NTSC PAL
VIDEO
/S-VIDEO
/AV OUT
PAL COMPONENT
COMP.
/RGB
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
The unit
In this connection, set the VIDEO
SIGNAL SELECTOR to "Y/C."
WhiteRed
VIDEO SIGNAL SELECTOR
White
Red
TV
S-video cable (not supplied)
Audio cable (supplied)
In this connection, set the NTSC/
REMOTE/PAL switch set to "PAL."
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
AV COMPU LINK
PCM / STREAM
COAXIAL
SUBWOOFER
CENTER
LEFT
RIGHT
REAR FRONT
OPTICAL
VIDEO
S-VIDEO
DIGITAL OUTAUDIO OUT
COMPONENT
YP
B PR
VIDEO OUT
VIDEO SIGNAL SELECTOR
Y/C REMOTE
NTSC PAL
VIDEO
/S-VIDEO
/AV OUT
PAL COMPONENT
COMP.
/RGB
IN
AV
AV OUT
The unit
In this connection, make sure that the NTSC/
REMOTE/PAL switch set to "PAL."
SCART cable
(Not supplied)
TV
NTSC/REMOTE/PAL Switch
XV-NA7SL(B).book Page 7 Wednesday, July 31, 2002 1:00 PM