Filter
Top Products
Receiver operation
13
•
Alter the values step-by-step using the
keys.
Saving the settings
After entering the time press the
key to start the clock.
Return to receive mode
•
Press the
key to return to receive mode.
or
•
Press the
key to continue with the timer programming.
Timer setting
The unit is in normal mode.
•
Press the
key twice to call up the menu for the timer settings.
The following screen display appears:
In this menu you can make timer settings in order to start the receiver simultane-
ously with a video recorder (e.g. for recordings).
The bottom menu line shows keys you can use to make the settings.
Meaning of the columns
Date
Switch-on date.
Start
Start-time for automatic switch-on.
Stop
Switch-off time.
No
.
Number of programme slot.
Making settings
After calling up the timer menu the cursor is positioned at the input line. The active
menu entry is shown by means of a flashing cursor (>).
•
For step-by-step input use the
keys.
or
use the numeric keys ... for direct input.
•
When using the numeric keys for input, the day/month and hour/minute entries
must always be entered in two-digit form, thus “
02.01.
" or “
08:05
" (not “2.1." or
“8:5"). If one of the columns of the input line already contains a value, the
keys can also be used to adjust the setting.
Following correct data entry the cursor jumps to the next column.
•
To enter a radio programme slot press the
key first of all.
Saving settings
•
Press the
key in order to save your settings.
The values entered are placed in the topmost line of the display. The other entries