Kathrein UFD 400 Satellite TV System User Manual


 
Receiver operation
14
are all shifted down by one line.
Making changes
If you want to alter a stored setting, place the cursor in the appropriate line by
pressing the
key. Enter the new data in the usual manner and save the new en-
tries.
To clear a timer that has been set, enter the programme slot as “
00
“ and save the
entry.
Return to receive mode
Press the
key in order to return to receive mode.
Note
If the timer is active, “
rEC
“is shown on the VCR LED display.
The programme selection keys are disabled during the recording period. If you
press this key the following message appears on the screen:
If the programmed recording time has ended the following message appears:
Press the key if you want the receiver to return to normal operation, otherwise
the unit switches off after 5 minutes.
The programme number in the timer menu is set to “
00
“.
Attention
If the timer is programmed for a recording, the unit may no longer be switched off
via the mains switch or else it must be switched on again in good time prior to the
scheduled time of recording. Both the time and the timer settings are maintained
even if the mains is disconnected.
Tip
When specifying switch-on and switch-off times, add some leeway to the times so
that the entire broadcast will still be recorded even if programmes are shifted
slightly.
Daily and weekly repeated switch-on
This receiver also allows an optional daily or weekly repeated switch-on.
Daily repeated switch-on
Enter “00.00“ in the
Date
column, and also the switch-on and switch-off times.
Weekly repeated switch-on
Enter the relevant date of the first switch-on day in the
Date
column, and for the
month enter “00“.
Example:
12.00: the timer is activated for the first time on the 12th day of the month and
weekly thereafter.
Video recorder playback (VCR)
For playback from the video recorder the satellite receiver does not need to be
switched on. Standby mode is sufficient to ensure the signal path is switched
through from the VCR Scart socket to the TV Scart socket.