Filter
Top Products
On Screen Displays / OSD
18
With the or button, exit the help function and return to the
main menu. Press the
button again and return to the originally
received programme.
TV channel identifier
The channel identifier is displayed for several seconds every time the
channel is changed or by pressing the
button. The indicates
that a channel is received even if no picture can be seen (e.g. radio).
The film symbol indicates a TV channel and appears along with the
time, and whether teletext is received. The + in the third line stands
for the programme selection from the main channel list. If the favour-
ite list is selected, the "apple" symbol appears. This is followed by the
programme title, as well as start time and end time of the running pro-
gramme, provided this data is transmitted.
Radio channel identifier
The identifier for the set radio channel has the same configuration. A
radio appears in the upper left-hand corner indicating a radio channel.
Programme times and text are displayed only if the corresponding
data is transmitted with the signal.
Error message
"Bad or no signal" indicates that there is a fault in the receiving system
or in the receiver settings. If the transponder is not transmitting any
signals, the channel identifier shows a Sat antenna instead of .
Check the Sat IF connection and the LNB configuration. As an aid, re-
fer to the list of service settings provided at the end of the operating
manual.