Filter
Top Products
Setting System Parameters
54
Local time/Timer
The receiver displays the UTC time transmitted with the data stream
(United Time Coordinate, former Greenwich Mean Time). Therefore,
in Germany, the time must be corrected by +1 hour.
If necessary, the summer time must be corrected, in order for the tim-
ers to turn on and off at correct times.
You can make this correction yourself using the numerical buttons.
Move the cursor bar with the
button to the entry ‘Local
time/Timer.’ The first digit in the time entry is shadowed. You can now
correct date and time with the numerical buttons. After each entry, the
cursor jumps to the next position. Press the two times to end the
entry. The receiver saves the new setting.
Afterwards, do not switch off the receiver with the mains switch but
rather with the remote control, otherwise the settings will be lost.
TV type
Use the buttons to specify whether your TV set is a
• PAL,
• Multi-standard or
• NTSC unit
Confirm by pressing
two times.
Picture format
Use the buttons to select the type of picture format, either
• 4 : 3 format or
• 16 : 9 format.
• Auto
Confirm by pressing
two times.
Screen
Use the buttons to select the type of screen display:
• conventional (P/S) = standard representation for 4:3 units or
• wide screen picture (letter box display off) - in this setting, the wide
screen is required for the 16:9 unit.
Confirm by pressing
two times.
A/V mode
Here, you use the buttons to select the type of video signal which
is present on the Scart socket. Select the signal which your TV set is
able to process.
Observe the operating instructions of your television set!
• FBAS –composite baseband signal (colour-/picture-/blanking-