Filter
Top Products
16
FIRST INSTALLATION
System
Select the setting here to match your reception system using the
buttons. You have the following
options:
- DiSEqC™1.0
- One Cable
- LNB only
If your reception system supports DiSEqC™, in “System” select “DiSEqC™1.0” (is used for switch-over
from one received satellite to another). If your reception system does not support DiSEqC™, select the
setting “LNB only”. If your receiver is connected to a single-cable system, select “One Cable”.
Press the
button to move to the next menu item.
Continue with the relevant section of “First Installation”.
When selecting the satellite(s), make sure that your reception position is aligned to
the desired satellite(s)!
The following display appears: