Kathrein UFS 910 Satellite TV System User Manual


 
46
RECORD WEEKLY
Use the

buttons to select the recording mode “weekly” (see screenshot below).
Use the

buttons to switch to the selection eld “Start” and use the

buttons to select the
desired recording starting time.
Use the

buttons to switch to the selection eld “End” and use the

buttons to select the
desired recording nishing time.
When all settings have been made, press the
button to save the recording settings. You can view the
scheduled recording in the recording schedule view of the EPG (see item “Recording schedule”).
Remember that the day of the week for the desired programme is loaded in
the recording schedule and you can make no further manual corrections to it!
Therefore before pressing the
(red dot) button, select the programme on the
day of the week that in future you will wish to make the weekly recording.
RECORD USER-DEFINED
Use the

buttons to select the recording mode “user-de ned” (see screenshot below).
Use the

buttons to switch to the selection eld “Day” and use the

buttons to select the
desired recording day. Press the
button to x the selection (the day will be shown in red letters).
If necessary the receiver will suggest some days to you; you can accept these suggestions or deactivate
them again using the cursor buttons and pressing the
button once.
Use the

buttons to switch to the selection eld “Start” and use the

buttons to select the
desired recording starting time.
EPG - ELECTRONIC PROGRAMME GUIDE