30
Press the
button twice to save the new channel. You will then move on to the next step of the fi rst
installation; the following is displayed:
FIRST INSTALLATION: CHANNEL SEARCH
time itself on and off again. Press the
buttons to perform the setting.
update time on
Set the required type of time update using the
buttons. The following options are available:
- “Actual channel (Das Erste)” (the time information is taken from the channel “Das Erste” - you can change
this setting later on the "Date and Time" menu) or
- “all Channels” (the time information is always taken from the channel currently selected)
The time will be updated in future based on the variant you have set.
Press the
!
(green) button to terminate the fi rst installation.
Local time offset (UTC)
Use the
buttons to set the time
zone variation from UTC (formerly
GMT) (e.g. for Germany +1 hour).
Use the
buttons to switch to the
“Automatic clock change” fi eld. Use the
buttons to select whether the
receiver should automatically change
over between summer and winter
time. If “On” is selected, the receiver
automatically sets itself to the right
time. If you select the setting “Off”,
you must use the “summer time” fi eld
shown below to switch the summer